Lathe Operations: Facing

Facing Operations Facing is the process of removing metal from the end of a workpiece to produce a flat surface. Most often, the workpiece is cylindrical, but using a 4-jaw chuck you can face rectangular or odd-shaped work to form cubes and other non-cylindrical shapes.

When a lathe cutting tool removes metal it applies considerable tangential (i.e. lateral or sideways) force to the workpiece. To safely perform a facing operation the end of the workpiece must be positioned close to the jaws of the chuck. The workpiece should not extend more than 2-3 times its diameter from the chuck jaws unless a steady rest is used to support the free end. Cutting Speeds

If you read many books on machining you will find a lot of information about the correct cutting speed for the movement of the cutting tool in relation to the workpiece. You must consider the rotational speed of the workpiece and the movement of the tool relative to the workpiece. Basically, the softer the metal the faster the cutting. D…

How to Connect Two Computers Without a Router

How about we accept you have two machines at home and you need to associate them together with the goal that you can undoubtedly impart a web association between the two machines or exchange photographs, music and different documents starting with one machine then onto the next. How would you do this?

Associate Two Computers with an Ethernet Cable

There are two choices – you can either purchase a switch or, on the off chance that you are searching for something more straightforward and would prefer not to use cash on new systems administration equipment, you can associate the two machines utilizing a regularly accessible link. The last system doesn't include any muddled system settings and you will at present have the capacity to impart records, web association, and even printers between machines.

To set up this fundamental wired home system, everything you need is an economical Ethernet hybrid link and the other necessity is that system cards* (otherwise called LAN or Ethernet cards) ought to be introduced on each of you machines.

This ought not be an issue in light of the fact that system cards are accessible on most more up to date machines naturally yet in the event that you are working with an extremely old machine, you can either connect an inner LAN card to your machine's motherboard or strive for a USB Network connector that will transform a USB port into an Ethernet (Rj45) port.

An Ethernet hybrid link resembles a standard Ethernet link however the interior wiring is a bit diverse. You can buy hybrid links at or from your nearby machine store. In the event that you experience difficulty discovering them, you can buy a reasonable hybrid connector and that will give you a chance to utilize any standard Ethernet link as a hybrid link.

Unite Computers with an Ethernet Crossover Cable

Before uniting the two machines with a physical link, verify that both machine are utilizing the same workgroup. Here is regulated guide that clarifies how you can change the workgroup of your machines.

Changing workgroup in Windows XP – From the Start menu, right-click "My Computer." Select Properties in the drop-down menu, and afterward select the second tab that says "Machine Name" from the System Properties window. Presently click the "Change" catch, enter a special Workgroup name and reboot your machine.

Changing workgroup in Windows 7 or Vista – Open the Control Panel, sort "Workgroup" in the inquiry box, and select the passage that says "Change Workgroup Name." Click the "Change" catch, enter a Workgroup name and restart the machine. Windows 7 clients can skirt one stage; basically sort "Workgroup" in the hunt enclose the begin menu, and select the first entrance, then move ahead as above.

Presently that the workgroups are same for both machines, join the two machines together utilizing the Ethernet hybrid link. Basically module one end of the hybrid link into the system connector of Computer An and unite the flip side of the link to the system connector of Computer B.

Windows will consequently perceive the new system, and you can now effortlessly view documents and organizer that the other machine has imparted. Essentially open Networks from the Start Menu (or the Control Panel), and you ought to see the other machine by its name. You can then skim any imparted records on the other machine, and can even use imparted printers.

Troubleshooting – If you don't see the other machine under Networks, you presumably have a brief at the highest point of your Network window saying that Network revelation is turned off . Select "Turn on Network Discovery and File Sharing."  In the following brief, select "No, make the system I am joined with a private system."  Now you ought to see the other machine on the home system.

While it is conceivable to impart records between two machines associated with a hybrid link without making them a piece of the same workgroup, the system will just work if both machines have this system set as a private system, regardless may cause issues. It is accordingly fitting to have both machines on the same workgroup before offering records and p


Popular posts from this blog

Lathe Operations: Step Turning

Lathe Operations: Plain Turning

What Is Capstan Lathe Machine?